The City of Avondale's As-Built Plans and Record Documents Submittal and Approval Process is detailed in Chapter 6 of the City's General Engineering Requirements.  This chapter outlines the minimum requirements for the preparation and submittal of As-Built plans.

The As-Built Checklist and Sewer Manhole Invert and Slope Worksheet can be found in Plan Review and Permitting

ENGINEERING AND ROW CONSTRUCTION PERMIT SUBMITTAL GUIDELINES:

• Submit a completed Engineering Permit Application along with three copies/sets of City approved plans to the Engineering Department and online by clicking here.
• The application must be completed in full, including the Contractor’s contact information, contractor's ROC license number and a City of Avondale business license number.  A business number can be obtained from the  City’s Finance Department.
• A current certificate of insurance including liability, auto and workman’s compensation coverage must be provided with the City listed as an “additionally insured” party.  Document details
• Depending on the type or size of project, additional documentation may also be required as part of the permit approval process.  Refer to the “Application Requirements” section on the permit application for a list of any additional  documents that may be needed.
• If the application is complete and all required approved plans and documents have been submitted and deemed acceptable, staff will proceed with the review and processing of the permit application.
• The contractor or designated contact person will be notified when the permit is ready for pickup and informed of any fees due.
• Contractor or designed contact person will pick up and pay for the permit at the Development Services Center and will receive an original copy of the permit along with a stamped "CONTRACTOR’S COPY” set of plans.
• If additional information or assistance is needed, please contact the Engineering Department.

City Water Hydrant/Jumper Meter Request Application for Construction Water Uses

All City water used for construction activities—including dust control and pipeline testing—must be metered from a designated fire hydrant source or other approved “jumper” connections.  All connections must be protected with City‑approved and tested RP backflow prevention devices, provided by the contractor.  All referenced forms and applications must be completed and submitted to the appropriate department as instructed.

After your application has been processed and approved, you will be notified to visit City Hall to pay the required.  Beginning Thursday, October 23, water hydrant applicants will have the ability to pay their application fee online. Click here to pay online (Pay or View Bills).

The current City of Avondale Supplement to the Maricopa Associates of Governments (MAG) Uniform Standard Specifications and Details (Specifications and Details) dated June 2018 replaces the existing Avondale Construction Specifications Manual dated April 2008. The Avondale Supplement to MAG Uniform Standard Specifications and Details shall be considered a Supplement to the Uniform Standard Specifications and Details for Public Works Construction as published by the Maricopa Association of Governments.

The City of Avondale Supplement to MAG Specifications and Details Manual shall be used in conjunction with all construction improvement plans within the City of Avondale jurisdiction.

Supplement to MAG Specifications and Details Manual

Supplement to MAG Uniform Standard Specifications and Details for Public Works Construction

Uniform Standard Details for Public Works Construction (Indices)

Standard Details A1100

Standard Details A1200

Standard Details A1300

Standard Details A1400

Standard Details A1500

Standard Details A1600

Standard Details A1700